Seven layers between you and what can go wrong

A home battery sits in your own home, often for years, without you giving it another thought. That is why the FlexVolt One watches itself on seven levels at once: electrical, thermal, in software, in the enclosure, at system level, during transport, and with an active suppression system as the final step.

The seven layers, from cell to fire suppression

Each layer has its own task and its own moment at which it steps in. Together they cover the whole route, from the first deviation in a cell to the case where heat is genuinely released inside a module.

FlexVolt One · one module, exploded view

Schematic view. Outer dimensions follow the specifications; the position of internal parts is indicative.

Tested by others, not only by ourselves

Safety you claim yourself is not safety. The systems have been assessed and certified to the standards that apply in Europe and beyond for battery storage, electrical safety and transport.

CE UKCA UL 1973 UL 9540 UN 38.3 IEC 62619 VDE-AR-E 2510-50 CEI 0-21 CE/EMC MSDS

These marks cover the battery modules as well as the inverters and the transport of the batteries.

What the modules can take

The figures that have to do with safety and service life, in one place, for the modules of the FlexVolt One.

Cell chemistry
LFP (LiFePO4)
Protection rating
IP66
Operating temperature
−20 to 50 °C
Heating module
fitted as standard
Depth of discharge
95% DoD
Service life
7,000 cycles
Standby consumption
< 2 W
Transport check
G2 ShockWatch per module
Mounting
wall or floor
Warranty
10 years modules · 5 years inverter · 70% after 7,000 cycles

The last layer is the installer

A safe product only becomes a safe installation at the moment it is connected properly. That is why delivery and fitting in the Netherlands always run through certified installers.

Fitted by a qualified professional

In the Netherlands the FlexVolt One is delivered and installed by certified installers. They decide the place, the cabling and the connection in the meter cupboard, and commission the system in line with the applicable regulations.

An application that suits your situation

The system can work on-grid, on-grid with backup or fully off-grid. Which of the three fits best depends on your connection, your consumption and what you want to keep using during a power cut.

You can see what the system does

Through the FlexGrid energy management system you follow the installation in real time and get an SMS warning as soon as something deviates. A fault therefore does not run on unnoticed until you happen to spot it yourself.

Questions about safety in your home?

Tell us where the battery would go and what your meter cupboard looks like, and we will explain how the seven layers work out in your situation and which set-up goes with it.